Services
Your Trusted Asphalt Milling Experts in Overland Park, Kansas
“Choose us for maintaining your asphalt driveway and parking lot – call us today!”
“Choose us for maintaining your asphalt driveway and parking lot – call us today!”
When it comes to an important project such as asphalt milling, you want to make sure that the paving contractors you choose have the best equipment. As the leading asphalt paving contractor in Overland Park, Kansas, Overland Park Asphalt uses only the best and latest equipment for this delicate process.
We proudly serve all properties throughout Prairie Village, Kansas, Overland Park, Kansas, Leawood, Kansas, Mission, Kansas, and Stillwell, Kansas. At Overland Park Asphalt, we know the importance of being environmentally friendly.
Our asphalt milling service involves creating a large area of the pavement by recycling or repurposing asphalt. This leaves you with a parking lot or roadway that’s still incredibly durable and rich in materials but offers a greener approach to paving.
Asphalt Milling is the process of removing the top layer of asphalt to a specified and even depth without disturbing the underlying sub-base. This allows new asphalt to be laid down without increasing the height of the road and saves you time when the sub-base doesn’t need to be fixed.
Milling is the pavement improvement technique we use to surface aging asphalt. We recycle the existing asphalt pavement layers to correct and restore the surface of worn-down asphalt.
Our milling machine grinds up aged materials into the correct consistency. We use this recycled material for fresh pavement. This top recycled layer can be mixed again with pure aggregate and liquid asphalt, resulting in a fresh layer of asphalt.
Asphalt milling is a sustainable process that uses existing materials, saving energy and resources. We repeat this process over and over again on the same surface when needed. All bumps and surface irregularities are eliminated, which improves your drainage.
Asphalt milling is done using a milling machine. The three basic parts of a milling machine are:
The cutting drum rotates cutting heads across the surface, chewing up the existing asphalt to the depth of the cutting heads. The vacuum sucks up the milled material and deposits it where the conveyance system can then move it to a dump truck.
Our dump truck and milling machine work together so the material is collected as it is removed from the surface, saving time and effort that would be needed to collect later. The milled asphalt is recycled and reused in future paving projects.
Once the milling machine has removed the asphalt to the desired width and depth, the surface is swept and cleaned. This removes dust and debris that might lead to problems with the new asphalt bonding to the surface. Once clean, the bond between the old and new asphalt should be very good, especially since the old asphalt has a rough surface from the milling that will bond with the new one.
Proper milling allows new layers of asphalt to be laid evenly and at the same depth as the old surface, ensuring other structures like curbs and drainage are not negatively affected. It also allows for the easy collection of old asphalt to be recycled for new applications.
Asphalt milling involves removing a part of the surface of a paved area as part of asphalt repair. Depending on the damage to the pavement, our asphalt technicians either remove just enough asphalt to smooth the surface or completely remove it. If it’s been some time since your last asphalt maintenance, then completely removing the surface may be necessary.
Asphalt repair is one of the main reasons why our customers call us for asphalt milling. When your driveway or parking lot is milled, it can create a smoother surface to drive and park on. Moreover, it can also significantly extend the life of your driveway and parking lot, adding to the value of your property.
As one of the leading asphalt paving contractors in Overland Park, Kansas, we want to let our customers know that there are several reasons for asphalt milling aside from repair. With the different weather elements, your driveway and parking lot are doubtlessly looking worse for the wear.
There are several issues that asphalt milling can deal with. Raveling is caused when the aggregate becomes separated from the binder and becomes loose on the road. Shoving causes a washboard-like effect that appears transverse to the direction that traffic travels in.
Finally, rutting doesn’t only occur on unpaved roads. When any part of your driveway or parking lot experiences heavy traffic, ruts may develop that can be deep or shallow. When you notice ruts developing on your property, we recommend having it repaired immediately, before it becomes an issue. As part of our asphalt services in Overland Park, Kansas, we use asphalt milling to repair the ruts in your pavement.
Other reasons for asphalt repair include swells, bumps, and sags. Asphalt milling is an excellent way to take care of pavement issues such as this.
For several years, Overland Park Asphalt has been the asphalt paving company to turn to in Overland Park, Kansas. Our technicians have been in the asphalt paving business for years and we offer our customers the best in asphalt overlay, milling, repairs, and installations. When your parking lot needs asphalt resurfacing or repaving, consider the green option of asphalt milling.
Asphalt milling should be left to professionals. When you are looking for reliable asphalt milling contractors, Overland Park Asphalt is ready to help.